Litter-Robot 3 Connect Clean Bundle

Simply follow these directions: 1. Remove one wipe. 2. Apply the wipe directly onto the Litter-Robot. Avoid wiping wires and electronic components in the base and on the inside of the bonnet. 3. Use additional wipes as necessary. Dispose of the used wipes when finished. The product will eliminate stains and digest any organic material that may be present.

Safe, all-natural ingredients include water, high-count good bacteria (naturally occurring within our own digestive system), and amino acidic enzymes known as amylase, lipase, and protease (all of which are naturally occurring within our bodies).

Replace the waste drawer liner whenever you need to empty the waste drawer. How often you empty the waste drawer depends on the number and size of your cats. For two average-sized cats, twice per week is typical. For a single cat, once per week is usually sufficient. For optimal odor absorption, we recommend changing the carbon filter every month, but replacement frequency is up to you and your cats' usage patterns. If you use scented litter, we recommend changing the filter more often as it will also absorb the litter scent.

The ramp fits in front of the Litter-Robot. Installation is easy: On the step of the Litter-Robot, peel up the black rubber step mat to reveal the mount for the ramp. Set the narrow end of the ramp on the step, so it rests in the recess. Place the step mat in the recess on the top step of the ramp.

The fence fits onto the bottom of the globe entrance. Installation is easy: Hold the fence upright inside the globe. Tilt the bottom of the fence toward you to align the back of the fence with the built-in kickguard on the globe. Keep the wing tabs of the fence inside the globe while rotating it downward. Gently pull forward and push down on the front of the fence to snap it over the lip of the globe. Make sure the fence is level and the three tabs along the outer rim of the fence are secured over the lip.

The Litter-Robot senses when your cat enters and exits the globe, which triggers the countdown timer and cleaning cycle. Kittens and small cats that weigh less than 5 pounds may not be heavy enough to trigger the cat sensor. Therefore, kittens and small cats that weigh less than 5 pounds can use the Litter-Robot, but not in automatic mode. Until they weigh enough, we recommend using your Litter-Robot in "semi-automatic" mode to keep your cat safe and relieve you from litter box scooping. For "semi-automatic" mode, leave the Litter-Robot switched off or unplugged. When you see your cat has used it, wait about 7 minutes for the waste to clump, then turn it on/plug it in. The Litter-Robot will automatically perform a clean cycle (which takes about 2 ½ minutes). Afterward, turn it off/unplug it again. Continue this supervised, semi-automatic mode until your kittens have gained sufficient weight to activate the cat sensor.

No, the Litter-Robot does not have a weight limit. With entryway dimensions of 16"H x 10.25"W and interior globe dimensions of 15"-17"H (depending on litter level) x 20"W x 20"D, almost any domestic cat can fit comfortably inside the globe. However, your cat must weigh at least 5 pounds to trigger the cat sensor.

No, the Litter-Robot will not eliminate all litter box odors. However, because waste is promptly removed and contained in the base, typical litter box odors will be reduced significantly. Additionally, a large carbon filter located in the front of the waste drawer absorbs odors and moisture to discourage mold growth (a major culprit of that telltale litter box smell). This is why the Litter-Robot is a great choice for multiple-cat households. We also recommend OdorTrap™, which works with Litter-Robot to eliminate litter box odors.