Litter-Robot 2: Drawer Liner Installation

Your Litter-Robot is shipped with a 10 gallon trash bag already installed in the waste drawer - two extra trash bags have been provided. The standard 10 gallon bags were chosen for their size, availability, and low cost. Standard 8 and 13 gallon trash bags also work well.

Follow the instructions below or watch our Waste Drawer Liner Installation video.

1. Roll the edges of the bag over. 

2. Insert the open, rolled edge around the four tabs.

Note: Place the bag so it is length-wise with the drawer. If you place it width-wise it will not fit easily.

Note: For easy removal you should leave a small unrolled section at the front of the base. This will give you something to grab and tie.

 Questions? Visit whiskersupport.com